ניקוי קירור EGR ו-EGR של טויוטה פריוס 2010-2015 עבור קוד P0401

This is a 2012 Toyota Prius EGR and EGR cooler remove and install. We removed this at 140k to clean the carbon build up from the exhaust gases over time. It keeps the engine running more efficiently. If the EGR system gets clogged, combustion temps will get too hot and will damage engine in the long run. If you get code p0401 egr flow insufficient, its caused by excess carbon, and doing this will help clear the code. If it's clogged excessively, or if its stuck open or stuck closed, then you might have to replace the parts.

Please refer to our
"Spark plugs remove and install"
https://youtu.be/mwUnPkQ94OE
and
"EGR pipe cleaning"
https://youtu.be/pMzonmV2km4
videos before proceeding with this video.

Tools:
https://amzn.to/4gxGF43 3/8 Ratchet
https://amzn.to/4gUlHN2 1/4 Ratchet
http://amzn.to/2ugaenF 1/4-Inch Drive Finger Ratchet
http://amzn.to/2aJy9kF 3/8 short extension set
http://amzn.to/2aYXnIy 3/8 10mm deep socket
http://amzn.to/2awcY1Z 3/8 14mm socket
http://amzn.to/2aZPqGv 10mm wrench
http://amzn.to/2aCThW4 3/8 12mm socket
http://amzn.to/2sNAam4 1/4" Drive Torx Socket E-8
https://amzn.to/3swZGzZ Finger Ratchet
http://amzn.to/2awcdGr Flat head screw driver
http://amzn.to/2aweq4t needle nose Pliers set
http://amzn.to/2b5u8I2 Hose clamp tool
http://amzn.to/2aETaN5 Hook and Pick Set (to get those plastic clips)
http://amzn.to/2tbPDvO Drills
http://amzn.to/2tbG004 Brass, Nylon and Stainless steel brush set

Parts:
http://amzn.to/2b5169E Brake clean

Torque specs:
10 ft. lbs - Wiper arms
6 ft. lbs - Wiper motor mount bolts
9 ft. lbs - Cowl sub assembly bolts
6 ft. lbs - Air box bolts
15 ft. lbs - EGR mounting nuts and bolts
7 ft. lbs - EGR E8 torx stud bolts
7 ft. lbs - EGR pipe bolts
Hand tight

like and share this video!

If you have any questions or concerns, feel free to leave comments on our FB page.

Like us on Facebook
http://bit.ly/nutzaboutbolts1

and SUBSCRIBE!
http://bit.ly/NutzAboutBolts2